Snapper Plus

Snapper+ (Open Model)

The Snapper+ pump controller has been designed to control all types of pumps under the most severe circumstances by utilising purpose built routines and user options developed through years of testing.

Snapper+ is set up to maintain a constant pressure by utlising a variable frequency inverter to alter the speed of the pump. A number of optional features are available, allowing you to select an option that best suits the customer's needs and expectations.

The Snapper+ concept is to supply a package that requires connection of power from an existing circuit breaker, wiring of pump motors and attaching a pressure tube to the discharge manifold and the system is ready to run.

Standard configuration is IP 54 version and not suitable for outdoor operation.

IP 65 version. Supplied with Danfoss IP66 VFDs.

Suitable for outdoor operation but must have a sun shade over the controller & VFD

 

 

Snapper+ (Enclosed Model)

The Snapper+ pump controller has been designed to control all types of pumps under the most severe circumstances by utilising purpose built routines and user options developed through years of testing.

Snapper+ is set up to maintain a constant pressure by utlising a variable frequency inverter to alter the speed of the pump. A number of optional features are available, allowing you to select an option that best suits the customer's needs and expectations.

Snapper+ can also be used to operate a Jockey Pump or Lag pump with the appropriate switchgear.

The Snapper+ concept is to supply a package that requires only connection to power, wiring of pump motors and attaching a pressure tube to the discharge manifold and the system is ready to run without any further expense.

The enclosed version is supplied in a powder coated mild steel enclosure with fan and vent and is IP 54, it is not suitable for outdoor operation unless there is a suitable sun shade or building over the panel. The enclosed version also has a circuit breaker for the VFD/Pump and a mains power isolator 

 

Features of both-

  • Text based LCD Screen
  • Pump ON/OFF/MAN buttons
  • Built in LED pump run indicators
  • Individual Pump Hours Run meters
  • On Board Data Logging
  • Serial Communications Capacity - RS485/Modbus
  • High-Low Alarms with definable actions
  • Unique Snapper+ Controller Selectable friction loss compensation
  • Suitable with various brand VSD’s
  • Simple menu structure
  • Configurable for up to 2 Pumps
  • Individual Pump Start counters
  • 25Bar Pressure transducer SCADA & BMS Interface
  • The controller is supplied in an IP 65 enclosure and optional IP65 VFD’s can be supplied.
  • Optional Lag or Jockey pump
  • Operation to 45 degrees Celsius ambient
  • Automatic pipe fill mode if required
  • Diagnostic displays
  • Built in LED pump available indicators.

Downloads

Category Name File
VFD Manuals Danfoss FC 202 Operation Manual
VFD Manuals Danfoss FC51 Programming Guide
Techsys Manuals Snapper Plus Manual
VFD Configuration Settings Snapper+ ABB ACS355 Settings
VFD Configuration Settings Snapper+ ABB ACS400 Settings
VFD Configuration Settings Snapper+ ABB ACS550 Settings
VFD Configuration Settings Snapper+ Altivar21 Settings
VFD Configuration Settings Snapper+ Altivar31 Settings
Data Sheet Snapper+ Brochure
VFD Configuration Settings Snapper+ Danfoss FC102 Settings
VFD Configuration Settings Snapper+ Danfoss FC51 Settings
VFD Configuration Settings Snapper+ Danfoss VLT6000 Settings
Data Sheet Snapper+ Data Sheet
VFD Configuration Settings Snapper+ Eaton HVX9000 Settings
VFD Configuration Settings Snapper+ PDL UD3 Settings
VFD Configuration Settings Snapper+ SEW EuroDrive Settings
VFD Configuration Settings Snapper+ Vacon 100 Settings
VFD Configuration Settings Snapper+ Vacon NXL Settings
 
Techsys Corporation Pty Ltd. ABN: 16 005 641 412
© Copyright 2006 Techsys Corporation Pty Ltd | Legal Notice & Disclaimer | Last updated 22 Jan 2017 (L)